Edge Banding Machine
KX670
KX670
Product Category：
| Item | Details |
|---|---|
| Size | 7000*1200*1650 |
| Product Introduction | 1. The conveyor belt guide rail is made of Zhongwang high-strength aluminum alloy, with wear-resistant and smooth bearing steel of 60 degrees grade without deformation, matched with a heavy-duty body
2. The conveying motor adopts Foshan brand with an output shaft of 50 mm, which has stronger torsion, pure copper national standard, and stable speed. 3. All high-speed motors adopt the well-known and reliable brand Shanghai Jiesite Motor with export configuration 4. The trimming guide rail adopts Taiwan HIWIN brand, stable and durable 5. Pneumatic system: Taiwan AIRTAC solenoid valve, Taiwan AIRTAC trimming cylinder with magnetic ring induction switch, YIRI oil-water separator 6. Electrical system: Delixi: air switch, contactor, Japan Omron travel switch 7. The pressure beam adopts three lifting columns, which can press even small boards firmly and will never deform. 8. The machine is equipped with a computer oil injection pump to inject oil to the trimming track and conveyor in real time for more stable operation and maintenance-free. 9. All parts of the machine are from Guangdong, with strong stability 10. The touch screen adopts Taiwan WEINVIEW PLC control system and touch screen 11. Heavy-duty body, with speed regulation, length counting, and air pressure alarm functions 12. The frequency converter adopts well-known brands Shenzhen Wanxin / Hailing with national warranty. Integrated nine functions: pre-milling, gluing, trimming (head and tail), rough trimming, fine trimming, profiling tracking, edge scraping, double polishing |
| Applicable Board Thickness | 10-50 |
| Power | Pre-milling motor power: 2.2Kw2
Glue tank heating power: 3.35Kw Board preheating power: 0.8Kw Glue tank transmission power: 0.75Kw Conveyor belt motor power: 3.7Kw Trimming motor power: 0.37Kw2 12000r/min.200Hz Rough trimming motor power: 0.75Kw2 18000r/min.300Hz Fine trimming motor power: 0.75Kw2 18000r/min.300Hz Profiling motor power: 0.37kw2 12000r/min 200Hz Polishing motor power: 0.37Kw4 Electric lifting: 0.37kw |
| Feeding System Type | Manual Feeding, Automatic Edge Banding |
| Edge Banding Speed | 25m/min |
| Glue Pot Capacity | PUR Glue Machine |
| Air Pressure Requirement | 0.6MPa-0.8Mpa |
| Power Supply Specification | 380V(220V 400V 415V etc) |
| Glue Type | VEA or PUR |
| Standard Color | White |
| Customizable Color | YES |
| Power | 21KW |
Related Products
-
×
DWS-210 Fully Automatic Head and Tail Trimming All-in-One Edge Banding Machine
Open full product pageThis fully automatic head and tail sealing and repairing machine supports both straight and curved edge processing, easily adapting to diverse panel edge shapes (such as straight furniture edges and curved decorative panels). It adopts a square rail slideway, which ensures smooth and stable movement during operation, avoiding jitter that affects sealing accuracy.
Equipped with a 4-blade alloy arc knife, it can precisely trim arc edges—delivering neat, burr-free cuts that enhance the overall aesthetics of the panel. The automatic end trimming function realizes hands-free processing of panel heads and tails, saving labor and ensuring consistent trimming quality.
In terms of feeding, it uses belt transmission with steel bar slides: the steel bar structure strengthens the slide’s stability, ensuring smooth and non-slipping feeding of panels. Notably, it can seal 3cm narrow plates without pressure, effectively preventing deformation of small-size panels during processing. Plus, the large-diameter dust collection system achieves a 98% dust removal effect, keeping the work area clean and reducing post-operation cleaning.
-
×
XZF450 Full-Automatic Bevel and Straight Edge Banding
Open full product pageXZF450 Full-Automatic Bevel and Straight Edge Banding machine focuses on stable performance and flexible adaptation to diverse processing needs. Its large automatic pressure beam adopts a robust structural design, ensuring firm clamping of panels during operation and avoiding deviations that affect edge banding accuracy. Equipped with a high-power pre-milling component, it delivers strong cutting force to process panel edges smoothly—effectively preventing edge breakage even for harder materials.
In terms of angle adjustment, it supports free switching between 30°, 45°, and 60°, easily matching the edge banding requirements of different furniture or decorative panels. The contoured pressure wheel fits the panel surface more closely, further enhancing the stability of the banding process and ensuring tight bonding between the edge strip and the panel. Additionally, the upper and lower dual dust collection design efficiently captures debris generated during processing, keeping the work area clean and reducing post-operation cleaning efforts.
-
×
D7 Curved and Linear Rocker Edge Banding Machine
Open full product pageThe D7 Curved and Linear Rocker Edge Banding Machine is a classic multi-functional semi-automatic edge banding equipment designed for panel edge processing. Its core feature lies in the unique manual swing arm profiling system, which allows the operator to precisely guide the edge banding head along the contours of any shaped panel edge via a handle, effortlessly completing edge banding tasks for various irregular curved panels (such as circular, wavy, or special-shaped boards). The column and swing arm are constructed from 8mm thick welded steel plates, ensuring robust durability and adjustable length.
The swing arm rotates around the column via hydraulic drive, operating smoothly with adjustable edge banding width and speed, while also featuring acceleration and counting functions. It is an ideal choice for small to medium-sized furniture factories, cabinet workshops, and custom furniture studios, particularly suited for diversified production scenarios requiring frequent switching between straight and curved operations.
-
×
Mini Edge Banding Machine
Open full product pageThis Mini Edge Banding Machine, weighing approximately 22 kilograms, is compact and highly portable, making it easy to move and use in various work scenarios. It supports both curved and straight edging, catering to diverse edge – banding needs. With an independent switch, it enables easy operation, significantly saving time and labor during use. Additionally, it is equipped with a material support plate, a micro – switch, a pressing wheel, and a tape – cutting cylinder, all of which work together to ensure smooth and efficient edge – banding processes.
